- Smart card prelam sheet
- RFID Key Fob
- Products
- Plastic Card
- Other Products
- Mifare Cards
USB 13.56mhz NFC RFID ACR1552U Contactless Smart Card Reader
USB 13.56mhz NFC RFID ACR1552U Contactless Smart Card Reader
Are you looking for a device that can easily read and write NFC or RFID cards? Then you must check out the ACR1552U USB NFC reader/writer. It is compact and durable, plugs into USB and can be used without installing drivers. It can read and write various NFC tags, bus cards, access cards, and even NFC-enabled mobile phones. Whether it is used for access control, mobile payment, check-in and ticket verification, or for development and research, it can do the job.
It can recognize many types of cards, such as the common MIFARE® cards, FeliCa cards, ISO 14443 and ISO 15693 protocol cards. Whether you are using Windows, Linux, macOS, Android or iOS devices, it can be used with it, even iPhones can be used via USB (supports iOS 16 and above).
What's so special about it?
Just plug in the USB and you can use it, no need to install drivers (support CCID standard)
Supports multiple contactless protocols, including NFC (ISO 18092), MIFARE®, FeliCa, ISO 14443 and ISO 15693
Can read multiple types of cards at the same time, such as bus cards, access cards, student cards, asset tags, etc.
Can also read mobile phones with NFC function
It comes with a small card slot (SAM card slot) where you can insert an encryption chip to improve security, such as bank or government cards
The firmware can be upgraded, and the device can be used for a long time without being eliminated
There are two-color lights and buzzers, and there are prompts during operation, which is convenient for judging whether the card is swiped successfully
Main specifications at a glance
| Specification | Details |
|---|---|
| Dimensions (mm) | 98 x 65 x 12.8 |
| Antenna Size (mm) | 50 x 40 |
| Weight | 89 g |
| USB Interface | USB CCID, Type-A or Type-C |
| Power Source | From USB Port |
| Cable | 1m, Non-detachable |
| Contactless Standards | ISO 14443 A/B, ISO 15693, ISO 18092 |
| Supported Cards | MIFARE®, FeliCa, Innovatron, Topaz |
| SAM Slot | 1 Standard SIM-sized Slot |
| OS Support | Windows®, Linux®, macOS, Android™, iOS |
| Certifications | CE, FCC, RoHS, REACH, WEEE, WHQL |
FAQ
Q: Can this card reader be used on mobile phones?
A: Yes. Supports Android phones (OTG required) and iPhones (iOS 16+).
Q: What cards are supported?
A: Supports MIFARE®, FeliCa, Topaz, ISO 14443, ISO 15693 protocol cards.
Q: Can it be used as soon as it is plugged in?
A: Yes, it supports CCID protocol, and there is no need to manually install the driver. Windows, macOS, and Linux can all recognize it directly.
Q: Can I develop NFC applications myself?
A: Yes. Comes with a complete SDK and sample code for easy development.